May 7, 2023
Description
A two piece print housing a RPI Zero 2W and RPI HQ Cam with 3010 fan for cooling.
Mount the camera to the camera mount without the lens attached otherwise it's a struggle.
Mount the RPIZero with the back facing the camera.
Step file included if you would like to remix.
There are plenty of YT videos on how to setup the RPiZero with the camera. Please check there. I personally setup MotionEye.
BOM…
8 M3x6 Countersunk hex head screws (4x for case, 4x for fan)
4 M3x4.2x6mm brass heat set inserts
8 M2.5x6mm self tapping hex head screws
1x 3010 5v fan
4 M3x4x5mm brass heat set inserts - set into the fan, they should just be proud of the fan face allowing a gap to the outer housing.
Works for me.
Please consider a donation to help support my designs.
PayPal.Me/RedWhere2020
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
Jason
