September 19, 2022
Description
We have several doors around the labs at work and we often need to prop them open. We had the opportunity to make some new ones, so I hopped on the computer, fired up Fusion360 and started designing. This doorstop prints well with a color change, however it is not necessary. I recommend printing with thicker walls for these, so my provided .gcodes have 5 perimeters and are printed at .3mm layer height. Not much to it, just slice however you see fit and hit print!
I typically design in imperial measurements. If a part comes in and it is too small, adjust the scale of that part to 2540% and it will be correct. Alternatively, in PrusaSlicer, you can right click the model and select “Convert From Imperial Units”.
License:
Creative Commons — Attribution
davemoneysign
