September 20, 2022
Description
ncluded a version without hex holes, if you want to add your own set, or don't need it at all. Hex holes are for 2, 2,5, 3, 4, 5, 6 mm
I printed it on vanilla white Prusament PLA, with 0.15 layer height and 0.4 nozzle. Snug supports from build plate only. Hex holes do not need support!
Originak base wasa bit tight on the wall. - For painted boards, I made a second version. The hooks are 5% smaller, and fits for 0.3mm thicker wall, than the original.
Original for white boards (really snug fit): Link
License:
Creative Commons — Attribution — Noncommercial — Share Alike
8
sacrilegor
