SZFYDOSH 7" Pi Touchscreen 3030 case

for the 1024x600 aliexpress.com/item/1005001709776554.html touchscreen from FYD Open Source Hardware shop with klipperscreen and raspberry pi on RatRig V-Core3

print with support for the upper 3030 connection part

print both flat, front with largest surface at the bottom

put the 4 included brass colored screw spacers on the 4 outside corners

screw 3030 part to front of printer with drop-in nuts and m5 bolts

squeeze hdmi and usb-c cable between sandwiched printed front/back

bolt front and back with m5x30 and m5 nuts

See newer version here: https://www.printables.com/model/561178-7-inch-touchscreen-holder

Print Settings

Printer:

RatRig V-Core 3 400

Rafts: 

No

Supports:

Yes

Resolution: 

0.3

Infill:

20

Filament:

Devil Design PETG

Category: 3D Printer Accessories