September 21, 2022
Description
Why I created this: I got up with our 4 month old daughter in the middle of the night and was pretty sure the (nearly full) bottle of breastmilk that got left out wasn't good anymore. Not wanting to wake up my wife who had been sick, I heated up a different bottle. Found out in the morning that she had left it out on purpose, expecting baby to wake up, and it would've been good. It wasn't by the morning so had to be dumped. Not wanting to re-experience the resulting scene that ensued, I came up with this design.
Printer:
Artillery Sidewinder X1
Rafts:
No
Supports:
No
Resolution:
.16
Infill:
20
Filament:
eSun PLA+
Notes:
Used Pause at Height in Cura to get the different color numbers and letters. If you're printing at .16 layer height, set the pause layer to 12. Can do the bottom, top, and pin all at the same time since the change happens on the top and bottom on the same layer. Will have 2 different colors on the pin but that hasn't seemed to matter. Can use a dab of superglue to hold the pin in, just be careful to not glue it all together so it doesn't spin.
License:
Creative Commons — Attribution — Noncommercial
Wheesir
