Disc Shooter Mk4

Semi automatic disc shooter - fully 3D printed - no extra parts or glue required.

Done as an engineering challenge and to show what can be done with 100% printed things, its also a lot of fun.  Last part of a series of shooting things.

Settings:

All done with 0.2mm layer and grid infill.

Plate1:  20% Infill - Support on build plate only, No brim - No raft

Plate2:  20% Infill - No supports - No brim - No raft

Plate3:  40% Infill - Supports everywhere - Brim - No raft

Plat4:  40% Infill - No supports - No brim - No raft

DSDiscPlate:  20% Infill - No supports - No brim - No raft

Note: If you have issues with the bolts fitting (all printers are different) you can resize Plate4 in your slicer and that should help.

This model is a development from my Mk3 disc shooter, but basically a new model as every single part (including screws) were all re-designed, so I didnt flag it as a remix (let me know if I should do).