Take another chocolate button!

Treat yourself to a chocolate button!
While you lift the flower, a chocolate button is placed in the middle of the flower. Enjoy it, and take another one!
What colour do you think is next?

Watch a short video clip to see, how it works: https://youtu.be/yZb0iY4oZEA

Please check also my other similar dispensers:
https://www.printables.com/de/model/27516-dispenser-for-candies-pearls-pills
https://www.printables.com/de/model/28635-take-another-easter-egg

Print instructions

Printing advices
The box will be printed in an inner and an outer shell in one piece. The support structure for the inner shell bottom is allready designed in the file, so you don't need to add support. But you must activate the option "Detect thin walls" in expert mode of prusaslicer. Otherwise, the support structure will not be printed. Also turn the "Bridging angle" to 90° for best results.

Very important after printing
To separate the inner shell from the outer shell, you must break the hidden support structure by hand! Just press every wall of the inner shell with your fingers against the walls of the outer shell. You will need a bit of power for that. If you have heard the clicking noise of the hidden support structure, try to lift the inner shell. That will break all the support structure. As last step, glue the flower on the lid.

Now fill the inner shell with chocolate buttons and put the lid on the top of the inner shell.

Enjoy!