Yet Another Calibration Tool [Y.A.C.T]

Designed for 0.4mm nozzle @ 0.2mm layer height.

Lots of calibration tools available, I just wanted something to give me a bigger overall picture than the usual 20x20x20 cubes to calibrate my Steps/MM in X, Y & Z

This is 100mm in all 3 axis.

Should print fine in as-is orientation on most printers, as each leg is embossed to line up with each axis and as long as:

X axis is LEFT/RIGHT

Y axis is FRONT/BACK

Z axis is UP/DOWN

all should be good, otherwise just re-orientate to suit.

Happy printing ;)

Category: 3D Printing Tests