Anycubic Mega Zero 2nd Z Leadscrew Mount

This is my dimensionally accurate, (after many iterations & fails), of the left rear mount required when upgrading to a dual Z axis configuration.

I have also included the stepper bracket as mine was modelled using a thinner than the standard OE stepper bracket that is fitted on the right side.

If fitting to the MZ2 the PSU will need to be relocated, I have mine free standing now for ease.

Even though there seem a lot of these second Z mounts out there, they are mostly, (99.9%), designed around the Creality printers, which have different screw spacings to the Mega Zero & will cause binding, I know, I've been there done that.

Designed for 0.2mm LH

I use 100% fill for strength & use PLA

Print Settings

Printer:

Anycubic MZ2

Rafts:

Supports:

No

Resolution:

Infill:

100

Filament:

Sunlu PLA

any

Category: 3D Printer Parts