October 19, 2022
Description
Reduced the overall length and material required to print. Allows use of standard sand paper sheets (11in/280mm in length).
Uses imperial hardware: 1/4-20 bolt 1.25" in length, ¼-20 nut.
Install bolt through knob and cover with knob-plug. Install nut on the base and cover with base-plug.
Depending on your printer calibration, may need to adjust for a tight fit of the covers or drill holes. No glue required.
Printed using PLA at 0.3mm resolution. No supports required if printed in the orientation provided.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
8
elcubano
