ZOHD Nano Talon Evo VTX and Antenna Mount

I wanted a clean way to mount the VTX and Antenna on my Nano Talon Evo. These parts mount to the underside of the nose/canopy lid and are out of the way of the battery etc. You'll need to cut a 17mm hole in the lid for the antenna mount. The VTX-holder sits on the ribs under the lid. Both are held on with a drop or two of CA. That VTX is 22mm wide and there is a groove in the holder to slide it into. It sits just behind the NACA duct so it stays cool during flight.

Print Settings

Printer Brand:

Anet

Printer:

Rafts:

No

Supports:

Resolution:

200

Infill:

Filament: Filaments.ca PETG Black

Notes:

Category: R/C Vehicles