DJI RC-Controller Lanyard Braket

To attach the braket to the controller you simply use two M4 x 8mm screws.

I designed it so that the charging port is still accessible, but the “Host” and Micro SD ports unfortunatly aren't, because than it would've been way bulkier. And I myself don't use the “Host” and Micros SD ports anyway.

Print settings:

• It is best if you use 4 or 5 perimeters, because it likes to bend a bit when you hang it from the lanyard.
• As well as the solid layers, for which I would also use 4 or 5
• Otherwise nothing special