Metric 1-8.5mm drill bit holder with SKADIS pegs

Holds your essential metric drill bits.

Printing Base

1. Supports needed for pegs
2. Recommend creating a modifier to increase infill around the pegs for better strength. I went to 100%
3. Once printing is done, you may need to drill out the holes to the right size…. 2.5mm bit to the 2mm hole, etc., so the bits fit in nicely.

Printing Number Strip

1. I printed at .1mm layer height with a .4 nozzle. .25 or smaller would probably make the numbers much more crisp.
2. Insert a color change at 2.5mm for the numbers

Assembly

1. Glue the strip to the base.
2. Hang with caution. These pegs are tight!