Clip for using ¼" / 5mm elastic cord with Prusa Face Shield

Clip that attaches to Prusa Face Shield to let you use quarter inch / 5mm elastic cord, which is also sold as "shock cord", for the Prusa Face Shield. This is useful because button elastic is hard to come by, and elastic cord hasn't sold out everywhere yet.

Print instructions

Clip that attaches to Prusa Face Shield to let you use quarter inch / 5mm elastic cord, which is also sold as "shock cord", for the Prusa Face Shield.

To use, cut a length of elastic cord about a foot in length. Tape the ends, or use a flame to melt the ends, so that they do not unravel. Run each end of the cord through the two holes, as shown in the photograph.

Can either be printed (STL file) or laser cut from 3mm material (SVG file). For medical environments, use a material such as PETG, that can be sterilized repeatedly. Not wood or acrylic or PLA. The wood that I cut was a quick test fit.