September 26, 2022
Description
NOTE: There are a few different sized original Apple Watch chargers available. This bracket only works with the charging puck with these dimensions:
27,7mm diameter and 7,5mm height.
Print with added perimeters (added strength in the thin arms) and consider ironing the last layer for a clean finish.
Thread the USB-end first through the hole and then press the puck in the recess.
Use strong double sided adhesive (foam-) tape to add the holder to the stand. The cable can be organised with zip ties and -anchors like these: https://www.printables.com/de/model/283591-small-zip-tie-anchor
You may also need to use some double sided tape to hold the watch charger flush in the bracket, depending on your print result.
License:
Creative Commons — Attribution
lord_edel
