Shapeoko 3 Vacuum Holder (top of X/Z)

This secures a vacuum hose in place atop the Z-axis of a Shapeoko 3. The hose I use is 1.75" diameter - yours may be larger. This helps ensure the hose is not puting undue pressure or becomes pulled off the dustboot. The negative of this strategy is the hose must remain free to move or risk ruining a job or the hose if the hose gets caught while milling.

It is designed to slip tightly between plates on the Z and should not need additional anchoring. An internal bore through the plastic around the hose support should allow a ziptie to secure the hose in place if you desire.

Print Settings

Rafts:

Doesn't Matter

Supports:

Resolution:

Any

Infill:

Notes:

Prints flat with no supports and whatever resolution you prefer. Extra walls/shells are better than more infill.

Post-Printing

If tight fit, sand or scale to fit.

How I Designed This

This was was made with Tinkercad. Feel Free to edit it here:

https://www.tinkercad.com/things/6KYyXuy3Dpd

Category: Machine Tools