Commodore 64 Joystick

There are 2 joystick top parts:

• One for sanwa type joysticks with 45mm mounting holes.
• One for joysticks with 32mm mounting holes.

You will need 4: 3mm x 30mm screws for the joystick and small 2mm screws for the cable clamps and connector cover.

If you use a female db9 connector, you might have to file a tiny bit off the sides, as I have made the connector covers the widest they could be while still allowing 2 joysticks to fit in the c64.

The holes for the buttons are 24mm.

Category: Video Games