Husqvarna Norden 901 SP connect phone mount

Just bought the new Norden 901 

and discovered, that I do not like the “design” (I would also not call it design) of the OEM phone mount.

Gladly I already had experience with phone holders for motorbikes (including 3 broken camera modules until I found a solution that works)

So here you can see my interpretation of nice looking phone holder.

For the print settings please have a look into the .3mf files.

But there is nothing really special, I just reinforced a few regions with 100% infill and increased the wall line count.

I would recommend ASA or something even stronger, because you do not want to loose your phone while riding.

Test results after 3000km with an iPhone 13 pro:

→ no broken camera module

→ no crack or deformation on the printed parts

BOM:

• 2X Ruthex melt in thread insert M5
• 8X oversized washer M3 DIN9021
• 4X round headed screw M3x10mm ISO7380
• 4X locknut M3 DIN985
• 4X rubber buffer 10x10mm 40°Shore “soft” → Ganter Norm GN351
• 1X SP Connect → Micro Stemm Mount Alu
• 1X M6x16 countersunk head
• 1X locknut M6 DIN985
• 1X oversized washer M6 DIN9021

Caution: 

Make sure, that you really use the “soft” rubber buffer

Norden owner:

Would be nice to see one or two more of this mounts out there ;-) If there are any questions, please let me know, I also have enough parts to build a few more.