Railblaza Railmount 25mm (1 inch)

I made this so I can use my Railblaza Starport design on the rail of my boat.

I print this with 4 parameter and 45% infill .

I used PETG because the layers bond better than PLA and it has some flexibility that PLA doesn't have.

Supports should not be needed if you orient the parts correctly.

I use this with my Starport model: https://www.printables.com/model/284271-railblaza-starport

I used sanding tape on the clamps to keep the mount from slipping.

It has a very strong grip.