Railblaza Navigation Light

This a navigation light with the 3 colors (red, green and white) with a 112,5º arc for the green and red and 135º arc for the white light.

I printed this on PETG and it has held up well. But you can print on ABS or ASA if you want.
The cover has to be printed with transparent filament and the gasket with a flexible filament like TPU (not mandatory but helps to waterproof the light).

You will need RGB LEDs and one A23 battery holder and a switch that activates when the cover is screwed on.

Depending on the amount of LEDs you use, the autonomy may be greater or lesser.

You will need to solder the LEDs to the battery holder and switch.

This is the switch I used (6x6x5): https://pt.aliexpress.com/item/32901668929.html?spm=a2g0o.productlist.0.0.618a43fd44Bce2&algo_pvid=7548ace9-80e5-47c5-807c-b3e1f44e7938&algo_exp_id=7548ace9-80e5-47c5-807c-b3e1f44e7938-1&pdp_ext_f=%7B%22sku_id%22%3A%2265821774215%22%7D&pdp_npi=2%40dis%21EUR%210.71%210.71%21%21%211.49%21%21%402132a21016643637192814379e016c%2165821774215%21sea&curPageLogUid=E34GA8s0dyGs

Print the torch with 35% infill and the cover with 100% infill.

Supports needed.