September 28, 2022
Description
This is a adjustable camera holder for the 3D Scanner FabScanPi (Model 2016 - )
The standard camera is the RaspberryPi Cam V1.x or V2.x
You can adjust the x- and y-Axis (about +/- 1 cm) and you can correct the angle by adjusting the three mounting screws at the backside.
Optional you can print "Sled I LED" so that you can also use the "RPi-RingLicht" Board.
BoM - Bill of Materials
To build the camera mounting you'll need the follwing parts:
##### to be printed:License:
Creative Commons — Attribution — Noncommercial — Share Alike
9
db3jhf
