September 28, 2022
Description
This is a laser cradle for the FabScan and FabScanPI. It fits to a SG90 Servo and can be used with a 9mm diameter laser unit. It was designed for the FabScanPI Sandwich Box (http://www.thingiverse.com/thing:1604281) but can also be used for other designs.
You need to flaten two sides of the servo coupling by using a file. Then re-drill the hole and fix the printed cradle with a very small screw.
Category: 3D PrintingLicense:
Creative Commons — Attribution — Noncommercial — NoDerivatives
9
db3jhf
