Megatronics 2.0 Mounting for Mendel

This thing should help you to fix your Megatronics 2.0 board on your printer.

Mendel: It can be fixed with three standard clamps (from the mendel files) and M3 screws.

A standard 40mm fan (same as for the hotend) or 80mm fan can be mounted on the FanBoard (M4 screws needed for that).

Instructions

1. Print the Board
2. Decide and Print FanBoard :

Select if you want the FanBoard with or without spacers.- If you decide for the board without spacers you'll need additonal M3 x 20mm (30mm) Spacers. There are two different FanBoards either for 40mm fan or for 80mm fan. 3. (Optional): Print the grill for the fan

Category: 3D Printer Accessories