Cutting Guide for Prusa Face Shield RC3 (Requires at least 240x240mm build plate) (OpenSCAD)

This is a cutting guide based on the laser cut spec diagram for the replaceable face shield sheets https://www.prusaprinters.org/prints/25857-prusa-protective-face-shield-rc3

It consists of a upper drill guide as well as a lower base for cutting the surrounding sheets.
I have not tested this design as it requires a build plate that is larger than my 200x200mm buildplate. But it may be of use for others.

• faceShieldSheetModel() : This is the model of the face shield sheet
• faceShieldDrillGuide() : This is the drill guide
• faceShieldCuttingGuide() : This is the cut guide with alignment holes

Being OpenSCAD it should be easy for you to adjust as needed if I made any mistakes.