Wedding Hoop Centerpiece and Table Number

This wedding floral hoop centerpiece and table number is a multipurpose print to save money on your special day! 

The model's dimensions are split into three different pieces:

1. The hoop
2. The base
3. The number (numbers are being uploaded progressively) 

Printed with 15% infill, supports on.

Assembly

The assembly was made to be done without the use of glue, but mileage may vary depending on the tolerances of your printer. Be sure to test the fit of one number with a hoop and a base before printing the rest and adjust scaling accordingly!

Steps without lights

1. Insert the number's stick into the hole in the hoop.
2. Combine the number + hoop with the base by inserting the bottom part of the number stick (which is now sticking out of the hoop) into the base.

Steps with lights

1. Thread the lights through the hole in the base keeping the battery pack/switch concealed under the base.
2. Thread the lights through the hole in the hoop.
3. Complete steps 1 and 2 from “Steps without lights.”
4. (Optional) You can remove the number now that the hoop hole is aligned with the base hole.
5. Wrap the lights around the hoop.
6. (Optional) Place the number back into the assembly.

You can now optionally add flowers as a finishing touch.

Update

2023/08/19 Updated twelve.stl to fit in hoop. Added thirteen and fourteen.