October 8, 2022
Description
A simple strong spool holder with filament demo tokens and slot.
HANDY TIP (if you are able to, i would mount a few in your printer enclosure as normally enclosures get to 40 - 45 degrees so will dry your filament for you)
Print settings : Print flat / no supports needed / 15% infill / 0.2 layerheight.
Tokens can be printed with 45cm filament cut offs if using direct drive.
Only 18 grams of filament needed for one bracket.
Screw holes are 3mm.
Enjoy
Happy Printing!
MattMo
License:
Creative Commons — Attribution — Noncommercial
7
MattMo3D
