🇹🇭 Mahanakhon Building - Bangkok , Thailand

ยินดีต้อนรับสู่กรุงเทพ

Welcome to Bangkok!

This entry includes 2 versions:

• No supports: split in halves, print each one lying down with the flat side on the print bed. You must glue after.
   
• Supported: print as regular, standing up, with supports to hold the cubes' overhangs.

The King Power Mahanakhon is the tallest building in Thailand. It opened in December 2016 and has become a landmark of the capital city Bangkok (Krungthep). The tower is the shape of a square prism with the appearance of a rough spiral with cuboidal surfaces cut into the side of the building. The building features a pixelated ribbon that swirls around the exterior, peeling back its surface layer to expose an inner layer with balconies. The glass walls are divided horizontally and vertically, adding to the building's "pixelated" appearance (from Wikipedia).

This model was created by Dany Sánchez .

MiniWorld3D is excited to bring this model to life as a homage to all the people of Thailand. This model was created from scratch by hand and brain in parametric software to ensure printability, using photographs and blueprints to create a beautiful and stylized version of your favorite landmarks. Please give credit, it's all about spreading culture! 

Be sure to follow MiniWorld3D

instagram.com/miniworld3d

 
MiniWorld3D is a collective of 45+ artists creating the best library of 3D printable models of landmarks of the world! 

Print photos by MiniWorld3D using GreenGate 3D clear blue recycled PETG.

-----------

Printing Tips

Suggested parameters:

For better details, print slow, such as 20mm/s for outer perimeters, you can slow down even more to print correctly.
Fine-tune retraction to avoid stringing.
Perimeters: 2
Top layers: 3
Infill: low, 12% for example.