Stake Out Pole Holder

A swing out of the way stake out pole holder for kayaks that have a gear track. Holder is long enough to reach over the side of wider kayaks. Can be mirrored for the left side if desired to swing backwards but functions fine on either side as is.

Printer: Creality Ender 3 V2

Nozzle: 0.6mm

Filament: Overture PETG

Perimeters: 4 or better for strength, 6 or better if using 0.4mm 

Infill:20% or better in a structural infill such as gyroid.

Parts needed: 2 Stainless T Bolts with knobs

Print Settings

Printer Brand:

Creality

Printer: 

Ender 3

Rafts:

No

Supports: 

No

Infill:

20%

Filament:

Overture PETG

Orange

Notes:

Printed at 6 layers for complete piece of mind about strength and durability. Holder as been tested numerous times without failure during strong winds and heavy current. PETG has shown no problem for durability and color fade despite being attached to an uncovered kayak on a trailer for months.