OpenEnergyMonitor Photodiode Optical Utility Meter LED Pulse Sensor Housing

If you have opened your OpenEnergyMonitor Photodiode Optical Utility Meter LED Pulse Sensor housing to desolder the LED like me, then you'll need to print a new one.

The OEM sensor housing is glued together, I used a hot air gun to try and disassemble but it's didn't come apart and the housing itself melted (as shown in the photos).

I removed the pulsing LED on mine because I use the sensor as a TTL input to a LoRaWAN transmitter and every bit of saved battery life counts.

Print Settings

Printer Brand:

Anycubic

Printer:

Rafts:

No

Supports:

Infill:

5%

Filament:

3DFillies PLA+

Black

Category: Electronics