Comgrow Z1 Air Assist

This model will replace the stock laser shield on the Comgrow Z1 laser. There is no loss in work space as the supply tube runs through the rear of the laser mount and It is the same length as the stock shield so it can still be used to focus the beam. The inlet hole is modeled to accept 7mm tube (i will accept requests to modify for different size tubing.) The raised marks near the bottom on the shield are center indication marks to assist with alignments.

PLEASE NOTE -This is only compatible with the 10W version. -Stock screws will not be long enough. Replace with (4) M3x12 screws for old version. new magnetic version can press fit in: use 1/8" cylindrical magnets