The Core - Raspberry Pi Desktop

This was a MAJOR project of mine. I wanted to make use of the Raspberry Pi 3B+ in the best way possible. And not just that, but to the ABSOLUTE EXTREME!

Sure you can overclock a Pi3, give it a heatsink, and tweak it, but I bet you've never seen a liquid cooled Pi3 like THIS ONE!

I went nuts, as you can tell. I need to make another video on its performance, and to see just how cold this can get!

BEWARE, THIS IS A BIG UNDERTAKING. IF YOU WANT TO MAKE THIS, YOU'RE GOING TO BE DOING A LOT OF WORK!

Here is my video going over it!

==============================================

The parts list you will need is in the video description.

==============================================

Print instructions

Add in supports wherever you feel you need to. The main case will take the most. But even then, it's not a whole lot.

0.2mm layer height
0.4mm nozzle