Wallmount for charger of Vanmoof S2/S3

Mount your Vanmoof S2/S3 charger to the wall with this nice and sturdy wallmount.

Printing

Either use the prepared G-Code to print on a Prusa MK3s or create G-Code for your own printer using the following recommended settings:

Nozzle Dia: 0.4 or multiples

Layer Height: 0.15 - 0.2

Infill: 20-25%

Supports: No

Raft: No

Brim: No

Mounting

Bolt the wallmount to any suitable wall using four screws with a diameter of up to 4mm.

Using

Store your charger vertically inside of the wallmount and use the small hook on the right side to quickly put away your charge-cable after charging.

Click the Like button above if you found this print helpful. 

If you want to support my work feel free to buy me a coffee using the Donate-Button next to my username on the top of the page.