October 5, 2022
Description
I printed the model in vase mode to make it a bit more translucent.
the layer height I used is 0,3 mm and the print meterial is PETG.
To make it fit a tea light you need to scale it up to 300% minimum, and tick the box for spiral vase in slicer. (the gcode file is already scaled at 300%)
I strongly recommend using a battery powered tea light.
If you want to use an open flame tealight do so at your own risk, and scale it up to at least 350% or more.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Ezra
