Front and Rear Wheels Tyco Turbo Hopper Taiyo Jet Hopper

Tyco Turbo Hopper / Taiyo Jet Hopper Front Wheel

• Rear Tire Size: 66.00-28-33 (Fits original Turbo Hopper AAA Battery Version. Does Not fit 9.6V)
• Front Tire Size: 58.00-41-14 (Fits original MK2, MK3, and some 9.6V. Does not fit MK1 "Fat Tire")
• The center mounting hole might not be precise depending on your printer. Use a 4mm drill bit.

Want More Free Designs? Like and Comment! If you enjoy this design, please leave a like and/or a comment. It keeps me motivated to make more, when I know people are using my designs.

If you would like to purchase a set of 3D Printed replacement Tyco Turbo Hopper Tires contact me here [https://xobyot.com]

Information about Tyco Turbo Hopper / Taiyo Jet Hoppers variations:

[https://rctoymemories.com/2012/05/06/tyco-taiyo-turbo-hopper-1986/]

[https://rctoymemories.com/2014/06/08/taiyo-jet-hopper-1986/]

I'm releasing these files under the Creative Commons Attribution-NonCommercial-NoDerivs (CC BY-NC-ND) License. This license is the most restrictive, only allowing you to download and share them with others as long as you credit me. You can not change them in any way, or use them commercially.

Print Settings

Printer:

Kingroon KP3S 3.0

Rafts:

Supports:

Yes

Resolution:

Infill:

20%

Filament:

3D Solutech PETG

Red Post-Printing =============

Center Hole is 4mm

Category: R/C Vehicles