Losi XXX 2WD R/C Buggy Front A-Arms

Front A-Arms for Vintage Losi XXX Buggy.

These are not an exact copy of the originals, I tried to keep the same dimensions and geometry as the originals but they are beefier for a better/stronger 3d printed part. I have printed them, and used them. They do fit and work just fine. The left and right are interchange, but I made both sides so the "Losi XXX" will not be upside-down.. The pivot holes are smaller so you can drill them out for a more precise round fit. You need a 1/8" drill bit for the inside (car side) and 3/32" for the outside (hub side).

Want More Free Designs? Like and Comment! If you enjoy this design, please leave a like and/or a comment. It keeps me motivated to make more, when I know people are using my designs.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

0.16

Infill:

Filament:3D Solutech PLA Black

Category: R/C Vehicles