October 2, 2022
Description
Skadis holder for small-sized Kimwipes boxes, which are typically 120mm x 120mm x 75mm in size. Designed around the dimensions of Kimwipes part number 34155.
Slightly overengineered to aid in easy, reliable, and rapid repositioning to fit different workspace needs.
This model requires M2.5 heat-set inserts, M2.5 screws, and printed hooks for mounting and M3 heat-set inserts and M3 screws for assembly.
This project requires printing of three parts, in addition to the hooks mentioned above:
When assembling, the front plates are likely to be 2-4mm from the risers they screw into. This is by design, since there can be some variability in the actual depth of the cardboard box itself. Chamfers are included in various positions to allow for cardboard box size variations and flexing as well. The result should be a snug, solid fit when assembly is complete.
The tradeoff for this snug fit is that swapping a box out can be a bit of a pain, requiring disassembly and reassembly.
For printing any heat-set insert project on a FFF/FDM printer its a good idea to use 4+ perimeters to make sure that there's enough surface for the inserts to bite into.
My test and final prints were done on a stock Prusa MINI+ with Prusament PETG. PLA and other materials should work fine though.
License:
Creative Commons — Attribution — Share Alike
9
fivesixzero
