DukeDoks Chasis Adjustable 1/10 Rc Car Exhaust

Simple 120mm exhaust in 1/10 scale for dukedoks rc car. You can adjust the length depending of what body shell you have.

You just screw it on the side of the clamp case holder with one M3x8 screw (the same you use on the other parts of the car) and you mount the exhaust on the support with other 2 screws with which you can set the position to match the rear bumper of your rc body.
If you have gray or inox filament use that, otherwise just use simple spray paint.

P.s. Just forget about the poor condition of my body shell :/