Frame for Prusa PEI Plate

This is a frame to keep the 10th anniversary in a safe place but display it at the same time. 

The moment I had it in hand i knew what I had to do. 
I went to the next IKEA for the frame and got some other stuff by hand, mainly:

• 1pcs IKEA Sannahed (35cmx35cm)
• 8pcs M3x12 Screw DIN912
• 4 CNC Kitchen M3 threaded inserts
  8-15 6x3mm magnets
• 1 Wemos D1 Mini
• 24 WS2812 (less or more deepending on the stripe you got by hand)
• some wires

The assembly process is straight forwared: 
Print the parts (printed the feets without bottom and top layers).
4 screws from the outside fix the octo ring, 4 from the inside fix the feets. 
Wire +/-/d to the wemos and your done after glueing them to the ring. 

I chose wled as firmware for my moodlight but you are free to choose what ever you want. 

Here are two very colorful impressions I was able to capture with the frame, but there are a lot more than that in wled. 

I would like to see more Plates nicely stored. So leave a make here if you decide to store your plate also framed.