Wyze v2 bracket for camera mount

This is a simple adaptor to mount a Wyze v2 camera on a camera mount arm. I've used this with https://www.thingiverse.com/thing:2998011 for example. I'm sure it can work with other mounts too, that takes a ¼" screw to mount sideways.

I did not add an indent for the round, meta plate (for the magnets in the Wyze stand). I made a design for it, but I really don't think it's necessary because the bracket is a pretty snug fit.

Printing

I'd recommend printing it with the flat end down, and do a “paint on” support for the overhang at top. This printed easily for me, and the support comes off easily. You can set a good XY-distance on the support (like 120% or more) to make it even easier to remove. It just needs to help support the long bridge.

Using

Well, this is pretty straight forward, use the Wye's movable “arm” to adjust the angle, and then use e.g. hot glue to put a few dots down to make it stable. I did a string on several sides to just to make sure the camera can not move even when my clumsy hands touches it. [See second picture].