TLR 22 SCT 3.0 Laydown Conversion

You will need various longer M3 screws, M3 washers, M3 Lock Nuts, M3 female thumb screws, body mount (LOSB2414), Rear 22T tower with body mounts cut off (TLR234093) and a lay down transmission assembly. 

There is also a battery strap mount design that uses the parts from the TLR 22x4 Battery Mount.

I used 6mm spacers in the kit front shocks to limit front droop and used another set of front shocks on the rears with no spacers inside.

I also used the 4mm rear tower spacer but I included a 5mm if you want to run a little longer shock.