Balsa Stripper

A must have tool for every balsa model builder.
This tool helps you cut balsa strips with precise width everytime with square cuts everytime.
Specifically designed for #11 surgical scalpel blade.

Ergonimical design for ease of use while cutting.

Hardware required:

M3x10 bolt - 2 nos

M3 nuts - 2 nos

M3 washers - 2 nos

M4x20 bolt - 1 no

M4 nut - 1 no

M4 washer - 1 no

#11 scalpel surgical blade - 1 no

Recommended slicer settigs :
Nozzle: 0.4 

Material: PLA/PETG/ABS

Layer Height/Resolution : 0.2 mm

Infill: 40%

Infill pattern: Grid

Note: This tool is originally designed for a right handed person. You can mirror the models in your slicer if you prefer it left handed.