October 5, 2022
Description
Originally I was unable to align the front stop of the original grip with the end of my handguard due to the placement of the screw holes. I've added a section with a screw hole to the back so you can have more freedom aligning it on the handguard.
In the 3MF file there's also some negative volume cylinders to make the screw holes wider to accomodate an M3 screw washer and to widen the inside of the grip so you can reach the screw hole with a multi-bit screwdriver.
Printed well for me with PLA+, 0.2mm layer height, 4 parameters, 10% infill.
License:
Creative Commons — Attribution
11
michalgerhat
