RC Battery Storage Box

The Battery Storage Box comes in 4 different versions. It's also used in this really cool custom build we did, called the “C23 Workhorse”. The C23 Workhorse body is available here and here!

The Battery Storage Box is able to carry anything up to 168x52x55mm (LWH). It opens in 2 different ways depending on which compartment version you choose. Hinged and slide. Either one will make changing batteries easier on the trail. The provided mounting brackets allow the box to be mounted to any chassis rail with the width of 58mm to 118mm. Countersunk mounting holes are designed on the floor of the box, to bolt onto mounting brackets.

The battery can be secured inside the box using a velcro strap commonly used in standard RC battery trays. Openings to the front and back of the box allow the leads to join in from the ESC, effectively hiding your connectors and increasing realism. The dimensions for the openings are: 20x15mm. Therefore standard XT60 connectors will fit just fine. (If you need bigger openings, please contact me and I will design one for bigger connectors).

There are 2 different styles of hinged lids included. One has the contour indented into the lid for a more utilitarian look, while the other does not have this contour and is therefore just a flat surface for easier printing.

Required hardware:
2x M3x10mm socket head or button head
4x M3x15mm Countersunk
4x M3 washers
4x M3 lock nuts
1x Velcro Strap 20-30cm

Feel free to contact me if you need a bigger box for a bigger battery, or if you need bigger hole openings for bigger connectors.

Required minimum print volume: 190x65x60mm

Interested in our RC crawler bodies and accessories? Feel free to visit ahead RC stores here and here!

Be sure to check us out as we may upload free accessories from time to time!