October 6, 2022
Description
Description:
A remix of my D20 bin with a drainage hole and a tray. The tray has an indentation that’s slightly larger then the base of the pot for a better fit into the tray.
Printing:
This example was printed in FormFutura rPLA, however I will be printing one in PETG and share the results as that would be a better material for a plant pot. Pot is little over 23 hours to print with a .40mm nozzle at .20 layer height. The tray at the same settings it just shy of 4 hours.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
ihavegerms
