Bicopter / Twincopter / Dualcopter

New design, use the default PID, Very easy to fly even flip, much easier than the singlecopter.

(http://www.thingiverse.com/thing:1555053) https://www.youtube.com/watch?v=vbzvSiuaxHQ

Print Settings

Rafts:

No

Supports:

Resolution:

0.2mm

Infill:

Notes:

I printed all parts in ABS, 0.2mm layers with 15% infill, 3 shells and 3 top/bottom layers.

Post-Printing

BOM

4x M3x8 Nylon Threaded Spacers

12x M3x10 Nylon Threaded Spacers

4x M3x17 Nylon Threaded Spacers

4x M3x25 Nylon Threaded Spacers

4x M2 Self Tapping Screws

2x paper clips

4x ez connectors

//Different sizes depending on your electronic components.//

4x 2.5x70mm Carbon Fiber Rods

4x 2.5x110mm Carbon Fiber Rods

2x 4.5g servos (25mm mounting)

2x 12A ESC

1x FC Any support BICOPTER, (30.5mm mounting) Multiwii is recommended.

2x 2204 2300kv motors

1x 3S 1300~3S2200mah

2x 5045

1x RX

How I Designed This

Easy to print, easy to assemble, easy to repair, easy to fly and safe of course.

Category: R/C Vehicles