Rotary Tool Fan for Dremel/Craftsman

This is a fan that friction fits onto the collet nut of a Dremel/Craftsmen 395 rotary tool. It blows air over the bit to clear the dust from the cutting area so you can see better.

I remixed the original design as I didn't like the exposed fan blades, so I added a shroud around them. I was also interested in coming up with an optimal blade design to move the most air. I designed and tested 23 different ideas then measured and charted their output. The top 3 are available for download.

There are 3 different fan styles, two that are 25mm in diameter, one that is 20mm. I added the smaller one as I found the larger fans sometimes obscured the bit too much doing fine work. There's also a version without keying for rotary tools that don't have any.

Designed for 10.6mm diameter collet. If yours is larger/smaller, just scale the part up down. It requires a friction fit to stay attached.

Print Settings

Printer Brand:

Prusa

Printer: 

Prusa Mk2

Rafts:

No

Supports: 

No

Resolution:

0.2mm

Infill: 

100%

Category: Machine Tools