November 24, 2023
Description
Test fits grade been highly successful and as it is currently working as designed.
Will be producing a bottom cover that will be attachable for future designs to help hide cable's and object's from entering the compartment
Designed to slide under the Y rail and onto the side 4040's and secured with 2 Low profile T nuts.
Has a channel on top to help avoid ay Linear Rails so you'll have a minor amount of bridging to do for this process.
will use standard Voron Electronic Bay Board setups and will require M2,5x5 screws and M3x5's for securements
Files associated to the file:
Voron Parts:
https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/Electronics_Bay/Controller_Mounts
Leg Extensions:
https://www.thingiverse.com/thing:4721832
Linear Rail System plus all the Extrusion Systems (Patreon Service):
https://www.patreon.com/squirrelf3d/posts
Y Belt Tensioner:
https://cults3d.com/en/3d-model/tool/leandropuy-2
Materials:
PETG or ABS suggested for print materials
x4 - M2.5x10mm Nuts + Bolts (Motherboard Adapter)
x4 - M3x6 Nuts (Motherboard)
x4 - M3 T-nuts
x6 - M3 8mm Bolts
x8 - 6x3mm Neodymium Magnets
Change LOG:
October 8: uploaded the Beta pieces and should be good to use, the right side compartment has no attachments added to the lid yet but feel free to add your own!
October 9: Added cable channels to front fan sections and minor adjustments to fit and design of the top sections to where they meet the frame.
October 12: Added a mocked up base for the enclosure you shouldn't need to reprint anything other then the Y-Front, and possibly the Front Covers for added magnet holes to the design to attach the bottom pieces with 6x3mm magnets
October 14: Added a slot cover just size the length accordingly it'll just snap into the slots for easy install/removal
Nov 24: Added Y stop pieces for left side attachment's, and the Dual Z belt bottom adaptor
License:
Creative Commons — Attribution — Noncommercial
7
k2thestank
