Ghost of Tsushima Inspired Miniature Japanese Garden lantern

Legal Note:

Ghost of Tsushima is of course copyright of Sucker Punch Productions all rights reserved. 

I was inspired to create my own version of a Japanese garden lantern after playing the brilliant game Ghost of Tsushima, I came across a lantern in the Golden Temple area of the game, and I decided I would like to make a miniature version for myself that would look good on my desk.  

There is great potential for people to customise this design as there a large number of symbols used throughout the game and there are many possible alternative panel patterns. I am also confident that the design could easily be scaled up and printed at a larger size if required. 

If you have any questions or require a modification to the design, please feel free to contact me and please share your Makes as I love to see them. 

Print instructions:

The uploaded Gcode is specific for filament by JAYO low temp wood PLA which prints at 170-200c.

The .3MF model files have been oriented to achieve best printing conditions.

The default printing settings for most parts are 0.15-layer hight, 2 Perimeters, 20% infill.  I used a small amount support material with most of the models to ensure that dowl pin holes and other features that slot together are printed to their best quality.   

Ghost of Tsushima iki Island Large Panel Frame:

This part requires a higher infill percentage (60%) as the frame uprights can be brittle so I increased this up from 20%, however this was only an issue when I printed in the wood fill PLA standard PLA was fine.

Ghost of Tsushima iki Island Lantern Pinnacle:

I printed this part with a 0.10-layer height just for print quality. 

Assembly:

See the Exploded View Assembly Drawing to see how all the parts fit together. 

The model parts fit together with a series of pins or just slot together, the large and small panels require a small amount of glue to hold them in place.  I also decided not to glue the upper frame in-place as this allows future access to the tealight inside. 

Materials/Items used:

JAYO Low Tamp Wood PLA - https://amzn.eu/d/3r17fbf

Eldnacele Battery Operated Flameless LED Tea Light with 6H timer, Flickering - https://amzn.eu/d/igBcfYj

Professional Tracing Paper - https://amzn.eu/d/9pw8kP4