Scala frame

Created as a gift for a friend. I printed it using MMU2s upgrade, but you can also glue the top together.

It has a basket for 2xAA battery at the bottom. Printed using 0.6 nozzle and PETG filament. Remember about adding resistor for leds :D

It was made in a hurry, so it has some flaws that can be improved:

1. Light - at first, I used 4 leds from the edges, but the result was bad. Finished with 3 led placed centrally (model has still “sockets” for 5mm leds)
2. The leds were way too high for the internal height, so I added the additional frame. Finally, the additional frame was useful for gluing the logo and preventing the light from coming out from the edges. The frame is awful from the bottom.