October 7, 2022
Description
Remix of the Sherpa Blockhead Dragon print head.
Changes:
The thicker blockhead lowers hotend slightly so you may need to adjust position of Z axis limit switch. Use longer M2.5x16mm screws to attach the Dragon hotend, ideally also use M2.5 washers.
Also included is a modified X-Carriage with 4 screws for the linear rail carriage (two M2x8mm, two M2x10mm). Can also use washers to distribute stress on the carriage. The X-axis limit switch requires two self tapping screws to attach, instead of just one in the original design.
Print in ABS. I prefer to print with 100% infill on the blockhead and x-carriage.
Follow assembly instructions from the original Make: https://www.printables.com/model/213588-sherpa-blockhead-fan-system-for-voron-01
…. and with 2 additional M3 heat set inserts for the hotend fan and customised length of bowden tube.
License:
Creative Commons — Attribution — Noncommercial
7
Maker Mike
